An everyday lawn that looks the part. A 35 mm artificial grass for family gardens and landscaped outdoor spaces, offered in two material routes.
Need a sample or a quote? Find a supplier or installer
Products
ONE-DNA™ Orion 40
A fuller lawn. A little more luxury. A 40 mm artificial grass with more fibre weight than Orion 35, for gardens, roof terraces and landscape schemes.
Available in
100% PE
or100% PO
Description
When the lawn is the view
In some gardens the lawn is the main thing you see: a long view from the kitchen, a roof terrace from the living room, a courtyard framed by planting. ONE-DNA™ Orion 40 is the fuller version of the everyday Orion lawn, with a 40 mm pile and a higher face weight, for projects where that extra depth suits the space.
It is available in 100% PE and 100% PO. For the 100% PE route, reaction-to-fire test reports cover three configurations, with and without sand infill.
Products
Look at it up close
Fibre, tuft and backing. The same polymer family throughout the construction.
Top view, tuft and colour
Pile profile, 40 mm
Backing, PE or PP
Specifications and proof
Everything a specifier needs
Colors
Green
Gardens, roof terraces, landscape schemes and event areas, where a fuller lawn suits the space. On a roof or in an interior, the fire and drainage requirements of the project decide the build-up.
Available as ONE-DNA™ 100% PE or ONE-DNA™ 100% PO, each with its own technical data. The values on this page are for 100% PE. Tell us about your project and we'll advise which route suits it.
Built with FuseTech™, which bonds the fibres into the backing with heat instead of a latex or polyurethane secondary coating.
Tufted, with the same straight monofilament and curled thatch as Orion 35 at a longer 40 mm pile. The extra length is what gives the higher face weight and the fuller look.
On the 100% PE route, the datasheet advises 10 kg of dried silica sand per square metre, grading 0.5 to 1.0 mm with about 80% rounded grains. Where a project needs the higher fire performance, the tested configuration uses 15 kg per square metre (see Reaction to fire). For 100% PO, ask us for the infill advice.
650 l/min/m², the same for every ONE-DNA™ product.
ONE-DNA™ Orion 40 has no EN 1177 critical fall height result and is not intended for use under play equipment. On a roof, the roof designer specifies the build-up, drainage and fire requirements.
Reaction to fire depends on the installed build-up, because infill changes the result. For the 100% PE construction, Ghent University test reports cover three configurations: loose laid without infill, and with 10 or 15 kg/m² of silica sand. The 100% PO construction has not yet been tested. Ask us for the documentation for your configuration.
Warranty and maintenance conditions are set out in our warranty terms.
Environmental data
Life cycle assessment
Life cycle assessment is part of how ONE-DNA™ products are developed and improved. Results are published once independently verified. Ask us about the status for this product.
Designed for recycling
It starts with the materials
Fibre and backing are joined without a latex or polyurethane coating, within one material route. Whether the product is recycled depends on collection and local processing.
Why this product
The fuller lawn
Where this product belongs.
Gardens and roof terraces
Gardens, roof terraces and landscape schemes where the lawn is the view, and a fuller surface with more fibre weight than Orion 35 suits the space.
Where it fits
Applications
Each application page sets out what matters there and which ONE-DNA™ products fit.
Compare all nine productsTechnical documentation
The documents behind the product.
Need product specifications, installation guidance or supporting evidence? Tell us what you need and we'll help you find the relevant information for your project.
You may also consider
Other ONE-DNA™ products
Available in
100% PE
or100% PO
A little wilder. A lot more character. The longest pile in the range, at 45 mm, for larger gardens, landscape schemes and amenity lawns.
Related knowledge
ONE-DNA™ Orion 40 is used in gardens, roof terraces, landscape schemes and event areas where a fuller, deeper lawn suits the space.
On a roof or indoors, the project’s fire and drainage requirements decide the build-up, so the fire requirement is specified together with the infill quantity.
On the 100% PE route, ONE-DNA™ Orion 40 has a 40 mm pile and a face weight of 1,850 g/m², against 35 mm and 1,653 g/m² for Orion 35. Yarn and stitch rate are the same.
The difference is depth and fullness.
For the 100% PE construction, Ghent University test reports to EN ISO 9239-1 and EN ISO 11925-2 give results corresponding to Cfl-s1 loose laid without infill, Cfl-s1 with 10 kg/m² of silica sand and Bfl-s1 with 15 kg/m², under EN 13501-1.
Each result applies only to the configuration tested. The 100% PO construction has not yet been tested.
Not for current production. An earlier EPD to EN 15804+A2 (MRPI 1.1.00538.2024, modules A1 to A3) covers ONE-DNA™ Orion 40 in 100% PE made at Hasselt in the Netherlands. It does not cover production in Portugal or the 100% PO route. EPDs for current production are in their final stage.
Yes. ONE-DNA™ Orion 40 is offered in 100% PE and 100% PO, each with its own technical data. The values and fire test results on this page are for 100% PE.
On the 100% PE route the datasheet advises 10 kg of dried silica sand per square metre, graded 0.5 to 1.0 mm with about 80% rounded grains.
That quantity was tested with a result corresponding to Cfl-s1; the configuration with 15 kg per square metre gave Bfl-s1.