A fuller lawn. A little more luxury. A 40 mm artificial grass with more fibre weight than Orion 35, for gardens, roof terraces and landscape schemes.
Need a sample or a quote? Find a supplier or installer
Products
ONE-DNA™ Orion 35
An everyday lawn that looks the part. A 35 mm artificial grass for family gardens and landscaped outdoor spaces, offered in two material routes.
Available in
100% PE
or100% PO
Description
A lawn for the way a garden is really used
Most gardens are lived in rather than looked at: children, pets, a table on the grass. Designers and landscape contractors need a surface that suits daily use and still reads as a lawn from the house. ONE-DNA™ Orion 35 is the everyday option, at a 35 mm pile with a straight monofilament and a curled thatch.
Choose it on appearance and use. On a roof, in a play area or indoors, the requirements of that space decide the build-up.
Products
Look at it up close
Fibre, tuft and backing. The same polymer family throughout the construction.
Top view, tuft and colour
Pile profile, 35 mm
Backing, PE or PP
Specifications and proof
Everything a specifier needs
Colors
Green
Family gardens and landscaped outdoor spaces first. ONE-DNA™ Orion 35 is also considered for roof terraces, event areas and nursery outdoor areas, where the project’s own installation and safety requirements set the build-up.
Available as ONE-DNA™ 100% PE or ONE-DNA™ 100% PO. 100% PE gives a soft, flexible lawn; 100% PO combines the softness of PE fibres with the stability of a PP backing. Tell us about your project and we'll advise which suits it.
Built with FuseTech™, which bonds the fibres into the backing with heat instead of a latex or polyurethane secondary coating.
Tufted, with a straight monofilament for the visible blade and a shorter curled thatch near the backing. The thatch supports the upright fibres and adds the brown tone low in the pile that keeps the lawn from looking uniform.
On the 100% PE route, the datasheet advises more than 10 kg of dried silica sand per square metre, grading 0.5 to 1.0 mm with about 80% rounded grains. The sand ballasts the carpet and keeps the fibres upright. For 100% PO, ask us for the infill advice.
650 l/min/m², the same for every ONE-DNA™ product.
ONE-DNA™ Orion 35 has no EN 1177 critical fall height result and is not intended for use under play equipment. On a roof, the roof designer specifies the build-up, drainage and fire requirements.
Reaction to fire for ONE-DNA™ Orion 35 depends on the installed build-up, because infill changes the result. No reaction-to-fire test result is published yet for this product. Ask us if your project has a fire requirement.
Warranty and maintenance conditions are set out in our warranty terms.
Environmental data
Life cycle assessment
Life cycle assessment is part of how ONE-DNA™ products are developed and improved. Results are published once independently verified. Ask us about the status for this product.
Designed for recycling
It starts with the materials
Fibre and backing are joined without a latex or polyurethane coating, within one material route. Whether the product is recycled depends on collection and local processing.
Why this product
The everyday lawn
Where this product belongs.
Gardens
Family gardens and landscaped spaces where the lawn is used every day and still has to look like grass from the house.
Where it fits
Applications
Each application page sets out what matters there and which ONE-DNA™ products fit.
Compare all nine productsTechnical documentation
The documents behind the product.
Need product specifications, installation guidance or supporting evidence? Tell us what you need and we'll help you find the relevant information for your project.
You may also consider
Other ONE-DNA™ products
Available in
100% PE
or100% PO
A fresh look for everyday living. A 35 mm artificial grass with a heavier yarn, for gardens, terraces, roof amenity spaces and landscaped outdoor areas.
Related knowledge
ONE-DNA™ Orion 35 is used mainly in family gardens and landscaped outdoor spaces, where the lawn is walked on, played on and looked at every day.
It is also considered for roof terraces, event areas and nursery outdoor areas. In those spaces the installation, drainage, fire and fall-height requirements of the project decide the build-up.
Orion 40 has a longer pile and more fibre weight. On the 100% PE route, ONE-DNA™ Orion 35 has a 35 mm pile and a face weight of 1,653 g/m²; Orion 40 has a 40 mm pile and 1,850 g/m², with the same yarn and stitch rate.
Choose Orion 35 for an everyday lawn and Orion 40 where a fuller, deeper lawn suits the space.
Both have a 35 mm pile and the same stitch rate. On the 100% PE route, Elan 35 uses a heavier 12,800/14 dtex yarn against 10,800/12 dtex for Orion 35, which gives it a face weight of 1,880 g/m² against 1,653 g/m².
In practice Elan 35 carries more fibre per square metre. Compare the two side by side as samples, because colour and feel are best judged in person.
Yes. ONE-DNA™ Orion 35 is offered in 100% PE and 100% PO, each with its own technical data. The values on this page are for 100% PE.
On the 100% PE route the datasheet advises more than 10 kg of dried silica sand per square metre, graded 0.5 to 1.0 mm with about 80% rounded grains. The sand ballasts the carpet and keeps the fibres upright.
Ask us for the infill advice for 100% PO.
ONE-DNA™ Orion 35 can be part of a nursery outdoor area, away from play equipment. It has no EN 1177 critical fall height result, so where equipment introduces a free height of fall, ask us about a suitable impact-attenuating build-up.