A fuller lawn. A little more luxury. A 40 mm artificial grass with more fibre weight than Orion 35, for gardens, roof terraces and landscape schemes.
Need a sample or a quote? Find a supplier or installer
Products
ONE-DNA™ Elan 45
A little wilder. A lot more character. The longest pile in the range, at 45 mm, for larger gardens, landscape schemes and amenity lawns.
Available in
100% PE
or100% PO
Description
For spaces that can carry a deeper lawn
A large garden or an open amenity lawn is seen from a distance, and a short, neat pile can look flat across it. ONE-DNA™ Elan 45 uses the same yarn as Elan 35 at a 45 mm pile, which gives a deeper, more relaxed lawn with more volume.
Choose it where the lawn is seen across a distance and volume matters more than a neat, short finish.
Products
Look at it up close
Fibre, tuft and backing. The same polymer family throughout the construction.
Top view, tuft and colour
Pile profile, 45 mm (visualisation)
Backing, PE or PP
Specifications and proof
Everything a specifier needs
Colors
Green
Gardens, landscape schemes, amenity lawns and roof gardens, where a deeper lawn suits the space and is seen across a distance.
Available as ONE-DNA™ 100% PE or ONE-DNA™ 100% PO, each with its own technical data. The values on this page are for 100% PE. Tell us about the space and we'll advise which route suits it.
Built with FuseTech™, which bonds the fibres into the backing with heat instead of a latex or polyurethane secondary coating.
Tufted, with the same heavier straight monofilament and curled thatch as Elan 35, at a longer 45 mm pile. On the 100% PE route the face weight is 2,320 g/m².
On the 100% PE route, the datasheet advises 10 kg of dried silica sand per square metre, grading 0.5 to 1.0 mm with about 80% rounded grains. For 100% PO, ask us for the infill advice.
650 l/min/m², the same for every ONE-DNA™ product.
ONE-DNA™ Elan 45 has no EN 1177 critical fall height result and is not intended for use under play equipment. On a roof, the roof designer specifies the build-up, drainage and fire requirements.
Reaction to fire for ONE-DNA™ Elan 45 depends on the installed build-up, because infill changes the result. No reaction-to-fire test result is published yet for this product. Ask us if your project has a fire requirement.
Warranty and maintenance conditions are set out in our warranty terms.
Environmental data
Life cycle assessment
Life cycle assessment is part of how ONE-DNA™ products are developed and improved. Results are published once independently verified. Ask us about the status for this product.
Designed for recycling
It starts with the materials
Fibre and backing are joined without a latex or polyurethane coating, within one material route. Whether the product is recycled depends on collection and local processing.
Why this product
The deeper lawn
Where this product belongs.
Gardens and landscape
Gardens, landscape schemes and amenity lawns that are seen across a distance.
Where it fits
Applications
Each application page sets out what matters there and which ONE-DNA™ products fit.
Compare all nine productsTechnical documentation
The documents behind the product.
Need product specifications, installation guidance or supporting evidence? Tell us what you need and we'll help you find the relevant information for your project.
You may also consider
Other ONE-DNA™ products
Available in
100% PE
or100% PO
A fresh look for everyday living. A 35 mm artificial grass with a heavier yarn, for gardens, terraces, roof amenity spaces and landscaped outdoor areas.
Related knowledge
ONE-DNA™ Elan 45 is used in larger gardens, landscape schemes, amenity lawns and roof gardens, where a deeper lawn suits the space.
It is chosen for its appearance across a distance. On a roof, the roof build-up, its drainage and its fire requirements are specified per project.
Same yarn and stitch rate, longer pile. On the 100% PE route, ONE-DNA™ Elan 45 has a 45 mm pile and a face weight of 2,320 g/m², against 35 mm and 1,880 g/m² for Elan 35.
Elan 35 gives a neater, shorter lawn for spaces seen up close; Elan 45 a deeper, more relaxed lawn for larger spaces.
Not in itself. Pile length changes the look and volume of the lawn. Fall protection comes from a tested build-up of turf, infill and shockpad, and durability depends on use, installation and maintenance.
Yes. ONE-DNA™ Elan 45 is offered in 100% PE and 100% PO, each with its own technical data. The values on this page are for 100% PE.
On the 100% PE route the datasheet advises 10 kg of dried silica sand per square metre, graded 0.5 to 1.0 mm with about 80% rounded grains.
Ask us for the infill advice for 100% PO.
Not yet. No reaction-to-fire test result is published for ONE-DNA™ Elan 45. If your project has a fire requirement, tell us the build-up and infill quantity and we'll advise.