Serious play. No performance infill. A 28 mm sports surface for multi-use kickabout areas, indoor football, recreational ball sport and MUGAs.
Need a sample or a quote? Find a supplier or installer
Products
ONE-DNA™ Play 24
A robust 24 mm sand-filled artificial grass surface for playgrounds, MUGAs and multi-use spaces, made for intensive everyday use.
Available in
100% PO
Description
One surface, many ways to play
ONE-DNA™ Play 24 is made for spaces that are used hard and used constantly. A 24 mm pile filled with dried silica sand gives a flat, stable and predictable surface for running, ball games, informal play and the areas beneath play equipment. Seven colours make it possible to build zones, routes and game areas into the surface rather than paint them onto it.
Where play equipment introduces a free height of fall, the turf is combined with a shockpad and the complete build-up is specified against EN 1177.
Products
Look at it up close
Fibre, tuft and backing. The same polymer family throughout the construction.
Top view, tuft and colour
Pile profile, 24 mm
Backing, PP
Specifications and proof
Everything a specifier needs
Colors
Green
White
Blue
Red
Yellow
Black
Playgrounds and play areas, MUGAs and multi-use games areas, multifunctional sport and play spaces, and school grounds. Under play equipment, it forms the turf layer of an impact-attenuating build-up.
ONE-DNA™ 100% PO, combining the softness of PE fibres with the stability of a PP backing. ONE-DNA™ Play 24 is offered in this route only.
24 mm. The full construction data is stated in the technical datasheet.
Built with FuseTech™, which bonds the fibres into the backing with heat instead of a latex or polyurethane secondary coating.
Tufted. Stitch density and further construction data are stated in the technical datasheet.
ONE-DNA™ Play 24 is a sand-filled surface by design. The installation specification is dried silica sand, 0.2 to 1.0 mm. It ballasts the surface, supports the pile and keeps the surface flat under constant use. Sand on its own does not create fall protection.
The performance of the surface belongs to the complete build-up of turf, sand infill, any shockpad and base. Under play equipment, the shockpad is chosen for the free height of fall.
Tell us about your project and we'll advise on the build-up.
650 l/min/m², the same for every ONE-DNA™ product.
Reaction to fire for ONE-DNA™ Play 24 depends on the installed build-up, because sand infill changes the result. The current 100% PO construction has not yet been tested. Ask us what is available for your project.
Critical fall height is measured to EN 1177 on the complete build-up of turf, infill and shockpad, and cannot be attributed to the turf alone.
EN 1177 results for the current 100% PO construction are not yet available. Ask us about the options for the free height of fall in your project.
Warranty and maintenance conditions are set out in our warranty terms.
Environmental data
Life cycle assessment
Life cycle assessment is part of how ONE-DNA™ products are developed and improved. Results are published once independently verified. Ask us about the status for this product.
Designed for recycling
It starts with the materials
Fibre and backing are joined without a latex or polyurethane coating, within one material route. Whether the product is recycled depends on collection and local processing.
Why this product
Built for intensive play
Three reasons this product exists, and where it belongs.
High-use play
Playgrounds, MUGAs, multi-use sport and play spaces and school grounds, where the surface is used every day and the maintenance window is short.
Sand-filled by design
Dried silica sand is part of the system rather than an accessory to it. It ballasts the surface, supports the pile and keeps the surface flat under constant use.
Tested build-ups
Under play equipment, the turf is tested with a shockpad as one build-up to EN 1177. The earlier PE construction reached 1.45 m to 3.27 m of critical fall height; results for the current 100% PO construction are not yet available.
Where it fits
Applications
Each application page sets out what matters there and which ONE-DNA™ products fit.
Compare all nine productsTechnical documentation
The documents behind the product.
Need product specifications, installation guidance or supporting evidence? Tell us what you need and we'll help you find the relevant information for your project.
You may also consider
Other ONE-DNA™ products
Available in
100% PE
or100% PO
A 27 mm artificial grass surface with a fuller, grass-led character, for play areas, landscape and garden projects.
Related knowledge
Name the product, the sand infill, the shockpad and the critical fall height the play area needs, and specify the tested build-up as a whole rather than the turf alone.
We can help with the wording for a particular free height of fall.
The sand is a deliberate part of the system. It ballasts the surface, supports the pile so it stays upright under constant use, and keeps the surface flat. The installation specification is dried silica sand at 0.2 to 1.0 mm.
Sand on its own does not create fall protection.
It is measured to EN 1177 on a complete build-up of turf, infill and shockpad, not on the turf alone. That is why a specification should name the full build-up.
EN 1177 results for the current 100% PO construction of ONE-DNA™ Play 24 are not yet available, so ask us about the options for your project.
Yes, and the critical fall height changes with the shockpad. Choose the build-up against the free height of fall the project has to cover, and ask us which options suit your play equipment.
Seven colours: olive green, field green, blue, yellow, white, black and red. Colour does not change the construction.
Use it to build activity zones, game areas, MUGA layouts, routes and graphic designs into the surface instead of painting them on.
No product-specific EPD is published for the current 100% PO construction of ONE-DNA™ Play 24. An EPD to EN 15804+A2 (MRPI, 2024, modules A1 to A3) covers its earlier 100% PE construction. Ask us for the current status.